Rutafu-u Shrine — Conveyor Crossing

Location: Hebra Peak area, northwest Hyrule Ability Required: Ultrahand Difficulty: Medium — conveyor belt and moving platform timing

Overview

Rutafu-u Shrine uses conveyor belt mechanisms — moving surfaces that carry objects (and Link) along with them. You'll ride conveyors, redirect their flow, and use them to transport heavy objects to pressure plates that open gates.

Preparation

• No combat
• Takes 8–10 minutes
• No special gear

Walkthrough

Section 1 — Ride the Belt

1. A wide conveyor belt moves toward a large drop. The exit is on the far side of the belt.
2. Walk onto the belt — it carries you forward. Don't fight the belt movement; let it carry you.
3. At the far end of the belt, jump to the exit platform before the drop edge.

Section 2 — Object Delivery

1. A pressure plate is on the far side of a conveyor belt, but the belt carries objects to the left, not toward the plate (on the right).
2. Use Ultrahand to grab the directional switch above the belt and flip it — the belt reverses direction (now carries things to the right, toward the plate).
3. Place the stone block on the belt — it rides to the pressure plate, activating the gate.

Section 3 — Chain Conveyors

1. Two conveyor belts run in opposite directions. The altar platform is accessible only by navigating both.
2. Board the first belt (moving right). At the end of belt 1, jump to belt 2 — which moves left.
3. Ride belt 2 to a landing ledge between the belts. From the ledge, use Ultrahand to flip belt 2's direction switch.
4. Board belt 2 again — now moving right — and ride it to the altar platform.

Altar

Collect your Light of Blessing.

Tips

• You can run against a belt: If a belt is carrying you toward a hazard, sprint against its direction — the belt slows you but doesn't prevent movement. Use this to control your speed.
• Belt direction matters for objects: In Section 2, the stone block ONLY moves with the belt direction — it won't roll on its own. Make sure the belt is pointed toward the plate before placing the block.
• Section 3 landing ledge: The middle ledge in Section 3 is narrow. Jump to it early and position yourself centrally before flipping the belt switch.
• Chest on overhead ledge: In Section 1, there's a chest on a raised ledge above the conveyor. Grab the stone block near the belt entrance with Ultrahand and use it as a step to reach the ledge before the belt carries it away.
• Belt timing: The belts never stop — they're always moving. Don't wait for a "good moment" — there isn't one. Just board and move deliberately.

Chest Summary

| # | Contents | Location | |---|----------|----------| | 1 | Amber | Section 1 — raised ledge above the conveyor. Use a stone block as a step to reach it before the belt carries the block away. |

Nearby Points of Interest

• Rito Village — south, full services and Wind Temple questline hub
• Hebra Peak — nearby, highest summit in northwest Hyrule
• Rospro Pass Skyview Tower — southeast, Hebra region map activation
• Hebra Trailhead Lodge — east, rest and cooking near mountain trails

---

Part of the Hebra Shrine Guide — Tears of the Kingdom shrine walkthroughs on Hyrule Archive.