Sae Oniwa Shrine — Water and Stone

Location: Rimewise region Ability Required: Ultrahand Difficulty: Medium — block and water mechanics combined

Overview

Sae Oniwa Shrine interweaves two distinct mechanics — block manipulation and water flow — requiring you to think about both systems simultaneously. Blocks must be placed to redirect water channels, which in turn unlock gates and raise platforms. Neither system works in isolation; both must be engaged in the right sequence.

Preparation

• Ultrahand required
• No combat
• Takes 10–14 minutes
• Water pressure changes affect block placement — work systematically

Walkthrough

Step 1: First Channel — Block Dam

1. The entrance chamber has an open water channel running left-to-right. A gate blocks the forward path, and the gate only opens when the channel is full (water pressure sensor below it).
2. Use Ultrahand to pick up the stone block in the right alcove and place it across the channel as a dam, blocking water flow.
3. The channel fills behind the dam, pressure sensor activates, gate opens. Walk through.

Step 2: Water Wheel and Platform

1. The second chamber has a water wheel suspended above an empty basin. A platform is chained to the wheel.
2. You need to fill the basin to spin the wheel, which raises the platform to the upper level.
3. There is a secondary channel valve on the south wall — use Ultrahand to rotate the valve wheel 90 degrees clockwise to divert water into the basin.
4. The basin fills, the wheel spins, the platform rises. Wait for it to lock at full height before stepping on.

Step 3: Block Bridge to Altar

1. The upper level has a final gap between you and the altar. Two stone slabs are available.
2. Use Ultrahand to lay one slab horizontally across the gap as a bridge. The gap is wide — one slab doesn't span it fully.
3. Pick up the second slab and attach it to the first end-to-end using Ultrahand. Combined, they span the gap.
4. Cross to the altar.

Altar

Collect your Light of Blessing.

Tips

• Dam placement: The stone block needs to cover the full channel width to trigger the sensor — partial coverage won't work. Position it so water pools visibly behind it before moving on.
• Valve direction: Counterclockwise closes the water. Clockwise opens it. If you accidentally close it, rotate back and the basin drains. Refill by rotating clockwise again.
• Platform timing: The platform locks at maximum height automatically after 8–10 seconds of wheel spin. Don't jump onto the rising platform — wait for the lock click.
• Two-slab bridge: Attach the slabs in open space with Ultrahand, then move the combined bridge to span the gap as a single unit. Individual placement across the gap is harder and often results in misalignment.
• Chest: In the second chamber, before diverting water to the basin, check the dry north alcove accessible only when the channel water is dammed. The chest is there.

Chest Summary

| # | Contents | Location | |---|----------|----------| | 1 | Ruby | Step 2 — dry north alcove in the second chamber, accessible only when channel water is dammed from Step 1. |

Nearby Points of Interest

• Akkala Citadel Ruins — east, landmark with strong enemies and rare loot
• Rito Village — west, full services and Wind Temple questline hub
• Snowfield Stable — south, nearest warm-region rest point
• Ulri Mountain Skyview Tower — southeast, Rimewise map activation

---

Part of the Rimewise Shrine Guide — Tears of the Kingdom shrine walkthroughs on Hyrule Archive.