Rasiwak Shrine

Maren's Tip

Remember — if a shrine gives Rauru's Blessing with no puzzle inside, the real challenge was reaching the entrance. Check the surrounding area!

Walkthrough

1. Step 1: Enter Rasiwak Shrine in the Gerudo region and survey the puzzle chamber.
2. Six sandstone blocks of different shapes are scattered across the floor — a cube, a flat rectangular slab, an L-shaped block, a triangular wedge, a cylindrical column, and a small sphere.
3. The gate to the altar is sealed by a sand-weighted mechanism connected to a raised platform in the chamber's center.
4. Step 2: Examine the wall behind the platform.
5. A carved silhouette diagram shows exactly which three shapes must be stacked on the platform and in what order (bottom to top): the flat rectangular slab on the bottom, the cube in the middle, and the L-shaped block on top.
6. The other three blocks (wedge, cylinder, sphere) are decoys — placing any of them on the platform adds incorrect weight and the gate remains sealed.
7. Step 3: Use Ultrahand to grab the flat rectangular slab first and place it centered on the raised platform.
8. The slab forms a stable, wide base.
9. Ensure it sits flat — if tilted, subsequent blocks will not stack properly and may slide off.
10. Step 4: Grab the cube and place it on top of the slab, centered.
11. The cube fits neatly on the slab's flat surface.
12. Alignment matters — the cube must be within the slab's footprint or it overhangs and becomes unstable.
13. Step 5: Finally, grab the L-shaped block and carefully position it on top of the cube.
14. The L-shape makes this the trickiest placement — orient the L so its flat bottom rests on the cube's top surface and its vertical arm points upward.
15. If the L-block is rotated incorrectly (flat arm pointing sideways), it topples and you must restack.
16. Step 6: Once all three correct shapes are stacked in the proper order, the platform registers the combined weight and shape match.
17. The sand-weighted gate mechanism activates — sand drains from the counterweight, and the gate lifts with a grinding sound, revealing the altar corridor.
18. Step 7: Before crossing to the altar, check the back wall behind the platform.
19. A treasure chest sits on a narrow ledge containing a Topaz (worth 180 rupees and used for upgrading Rubber Armor at Great Fairy Fountains).
20. Grab it — easily missed since the opened gate draws your attention forward.
21. Step 8: Proceed through the gate to the altar and claim your Light of Blessing.
22. Hidden chest: The Topaz on the back wall ledge behind the stacking platform.
23. Ability needed: Ultrahand is the only ability required.
24. This shrine tests shape recognition, spatial orientation, and precise stacking.
25. Pro tip: If you accidentally place a wrong block on the platform, simply remove it with Ultrahand — the mechanism only triggers when all three correct blocks are in position.
26. There is no penalty for trial and error, so if you forget the silhouette diagram's order, experiment with different combinations.

Reward & Chest

Nearby Skyview Towers

Use these towers as reference points to locate this shrine on the map.

Region Temple Boss

After collecting enough Lights of Blessing from shrines in this region, you will face the temple boss: Queen Gibdo (Gerudo / Lightning Temple, difficulty 3/10).

More Shrines in Gerudo

• Agus Shrine — Puzzle, difficulty 2/5
• Bayge Shrine — Combat, difficulty 3/5
• Chichim Shrine — Puzzle, difficulty 2/5
• Daqa Shrine — Puzzle, difficulty 2/5
• Dinraal Shrine — Blessing, difficulty 1/5
• Gutoku Shrine — Puzzle, difficulty 3/5

Related Guides

• Gerudo Region Guide
• Gerudo Canyon Skyview Tower
• Gerudo Highlands Skyview Tower
• All 152 Shrines
• Shrine Quests
• Skyview Towers
• Lightroots
• Deep Walkthrough Guide